Nitronic 60 is a high Silicon, high Manganese, Nitrogen strengthened austenitic stainless alloy. Nitronic 60 is an all purpose metal that was originally designed as a temperature alloy and therefore performs well at high temperature around 1800ºF. The additions of silicon and manganese assist to inhibit wear, galling and fretting even in the annealed condition. Through cold working Nitronic 60, it is possible to attain higher strengths, however it does not enhance the anti-galling properties. The oxidation resistance of Nitronic 60 is similar to Alloy 309 and far superior to Alloy 304.

Chemical composition:

Grade	Chemical Component %
	Cr	Ni	Mo	Mn	Si	C	S	P	N
Nitronic 60	16.0-18.0	8.0-9.0	Max 0.75	7.0-9.0	3.5-4.5	Max 0.1	Max 0.03	Max 0.06	0.08-0.18

Application:
1. Infrastructure bridge pin and hanger expansion joints, parking deck expansion joint wear plates.
2. Hydroelectric Power – stems, wicket gate wear rings
3. Oil and Gas Production – pump wear rings, bushings, valve trim, seals, fittings, logging equipment and screens.
4. Food processing and Pharmaceuticals – galling resistant applications in sanitary equipment where lubricants can not be used
5. Chemical and Petrochemical – process valve stems, seats and trim, pump wear rings.
6. Aerospace

Available products for Nitronic 60:
Welded pipe/tube
Seamless pipe/tube
Pipe fittings
Flanges
Bar/Profiles
Sheet/ Plate/Coil/Strip
Wire/Wire rope
Forgings
Welding Rod
Fastener

Cargo packaging: