310/310S stainless steel bar
Density: 7.98g/cm³
Diameter: Ø1-500mm
Tolearance: h8-h11
Surface: black,pickling,bright,polish,rough turn,ground polish
Equivalent designations:
Grade AISI 310, UNS S31000, DIN 1.4841
Grade AISI 310S, UNS S31008, DIN 1.4845
Standard: ASTM A276,JIS G4303,EN 10088-3
Product introduction
310 stainless steel is austenitic chrome-nickel stainless steel with good oxidation resistance and corrosion resistance because of the higher percentage of chromium and nickel.
310S stainless steel is austenitic chrome-nickel stainless steel with good oxidation resistance and resistance corrosive, high temperature resistance, because of a higher percentage of chromium and nickel, so that it has much better creep strength, can continue to work at high temperatures, and has good high temperature resistance. Due to high content of nickel (Ni) and chromium (Cr), it has good oxidation resistance, corrosion resistance, acid and alkali resistance and high temperature resistance.
310/310S stainless steel bar and rod chemical compostition:
310/310S stainless steel bar and rod mechanical properties:
310S stainless steel is austenitic chrome-nickel stainless steel with good oxidation resistance and resistance corrosive, high temperature resistance, because of a higher percentage of chromium and nickel, so that it has much better creep strength, can continue to work at high temperatures, and has good high temperature resistance. Due to high content of nickel (Ni) and chromium (Cr), it has good oxidation resistance, corrosion resistance, acid and alkali resistance and high temperature resistance.
310/310S stainless steel bar and rod chemical compostition:
| Grade | UNS | Chemical Component % | ||||||
| C | Mn | P | S | Si | Cr | Ni | ||
| 310 | S31008 | Max 0.25 | Max 2.00 | Max 0.045 | Max 0.03 | Max 1.50 | 24.00-26.00 | 19.00-22.00 |
| 310S | S31008 | Max 0.08 | Max 2.00 | Max 0.045 | Max 0.03 | Max 1.50 | 24.00-26.00 | 19.00-22.00 |
| TYPE | PROCESSING METHOD | DIAMETER | TENSILE STRENGTH (Mpa) | YIELD STRENGTH (Mpa) | ELONGATION (2INCH) % | REDUCTION OF AREA % |
| 310/310S | Hot working | All | ≥515 | ≥205 | ≥40 | ≥50 |
| Cold Working | ≤12.7 | ≥620 | ≥310 | ≥30 | ≥40 | |
| ＞12.7 | ≥515 | ≥205 | ≥30 | ≥40 |
| HS Code: | 7222400000 | |||||
| Standard: | ASTM, JIS, GB, EN, GOST | |||||
| Length: | 1-12m | |||||
| Tolerance: | H8,H9,H10,H11 or as required | |||||
| Production method | cold drawn,cold rolled,hot rolled,forged | |||||
Packing and equipments:
