Thickness: 0.4-8.0mm
Width: 600-2000mm
Length: 1000-8000mm
Surface: No.1,2B,NO.4/4K/hairline,satin,6k,BA,mirror/8K
Standard: ASTM A240,ASME SA240,JIS G 4304,EN 10088-2.
Pattern: 5WL/6WL/2WL/Linen/square/diamond/concave/convex/tile/stone etc
There are 2 types of checkered/chequer plate:
1. The checkered plate is flat on one side and the pattern on the other. Such checkered plate is commonly used in chemical, railway vehicles, platforms and other places where strength is required.
2. The checkered plate made of mechanical stamping is concave on one side and convex on the other side, and usually used in general decoration occasions.
Technique
Cold Rolled,Hot Rolled
Width
1000mm,1219mm,125mm0,1500mm,2000mm,or required
Length
2000mm, 2438mm,2500mm,3000mm,6000mm,or required
Standard
ASTM,AISI,SUS,JIS,EN,DIN,GB,ASME,ETC
Brand
Chanson,TISCO,BAOSTEEL,POSCO,JISCO,LISCO
Application
kitchware,door,decoration,elevator,water tank,etc
Incoterm
EXW,FOB,CNF,CIF,CFR
Delivery
7 to 15 days,depends on the quantity
Chemical analysis:
| Grade | UNS | Chemical Component % | ||||||||
| C | Mn | P | S | Si | Cr | Ni | Mo | N | ||
| 201 | S20100 | 0.15 | 5.50-7.50 | 0.06 | 0.03 | 1.00 | 16.0-18.0 | 3.50-5.50 | - | 0.25 |
| 304 | S30400 | 0.08 | 2.00 | 0.045 | 0.03 | 0.75 | 18.00-20.00 | 8.0-10.5 | - | 0.10 |
| 316L | S31603 | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 16.00-18.00 | 10.0-14.0 | 2.00-3.00 | 0.10 |
| 430 | S43000 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | 0.75 | - | - |